https://pcpartpicker.com/list/yqgLVw

EDIT: Here’s what I ended up going with: https://pcpartpicker.com/list/j3VDbK

I decided to stick with the stock cooler for now, if I need to upgrade later then I will. I was going to downgrade the CPU to the 5600 as recommended to save some money, but the prime day sale kicked in and the X ended up being cheaper. I also switched to the 980 Pro rather than the Evo 970, once again courtesy of our capitalist overlord’s Bezos day. I managed to snag a new RX 6700 XT for $310 on Amazon a few days ago, but it’s shipping from Portugal so we’ll see if that sticks.

Really appreciate all the advice, yall made it a lot less intimidating.

  • Contramuffin@lemmy.world
    link
    fedilink
    arrow-up
    9
    ·
    1 year ago

    Honestly the build looks perfectly fine to me. Some considerations: if you want to save some money, you can swap out the 5600X for the 5600. The 5600 is a bit weaker, but it’s much cheaper. Also, you don’t necessarily need a cooler. You can use the stock cooler, which works pretty well. Having a 3rd party cooler is obv better, but if you don’t plan to push your cpu extremely hard, I don’t really think you’ll notice a difference

    • pm_me_your_happiness@lemmy.oneOP
      link
      fedilink
      arrow-up
      2
      ·
      1 year ago

      I’ll look into the 5600, I appreciate it. I’ll stick with the stock cooler as well, I can always pick one up later if it needs it. Thanks!

      • Contramuffin@lemmy.world
        link
        fedilink
        arrow-up
        2
        ·
        1 year ago

        Another minor thing to think of: the 5600X/non-X are AM4, meaning that if you ever want to upgrade in the future, it’ll be a bit more difficult (you’d have to replace your CPU, RAM, and mobo). If you don’t plan to upgrade soon, then it’s not really that big of an issue.

        Basically, each mobo is grouped into generations lasting roughly 5 years or so for AMD (3 or so years for Intel). If you want to upgrade your cpu, you’d have to replace cpu and mobo at once, if your mobo is outdated.

        Your mobo generation (AM4) just ended. Whether or not it’s worthwhile to spend a bit more money to buy the newer mobo (AM5) really depends on how often you plan to upgrade your cpu. If you plan to upgrade frequently, like every 3 or so years, it may be more worthwhile to spend a bit more to buy the newest generation, so that when you do upgrade, you can reuse your mobo. If you don’t plan to upgrade frequently (5 or longer years), then you should buy AM4, since by the time you want to upgrade, the newest generation will be outdated anyways and you’d have to buy a new mobo regardless of which generation you buy now

        Futureproofing is a bit of a finicky topic and people have long debates over when or how you want to futureproof, so if this seems too complicated, it’s perfectly fine to just ignore this. Your build is well-balanced and should work well. Just giving a bit of food for thought

        • pm_me_your_happiness@lemmy.oneOP
          link
          fedilink
          arrow-up
          1
          ·
          1 year ago

          My current pc is running on 8 or so years with the only upgrade being an ssd. I’ll probably run this one into the ground as well lol. That is good to know though, thanks. I’m hoping the next pc will be a little more high-end.

  • Mhlindsey@lemmy.fmhy.ml
    link
    fedilink
    arrow-up
    9
    ·
    1 year ago

    Honestly that looks like a pretty solid build. Only real suggestion i have is try searching around for used parts in your area on craigslist, facebook marketplace and such. With a little luck and some negotiation skills, you could score some nicer parts for less money

    • pm_me_your_happiness@lemmy.oneOP
      link
      fedilink
      arrow-up
      3
      ·
      1 year ago

      Do you know which parts are fine to get used? I’m worried about picking up a part on it’s last legs, like a gpu that was used for mining

      • VelociCatTurd@lemmy.world
        link
        fedilink
        arrow-up
        3
        ·
        1 year ago

        I’ve had good results with used CPUs and used ram. Never bought a used case or cooler, but those should be fine. I would stay away from a used mobo personally because if it doesn’t work right, you may not even notice it at first.

        I would not do a used PSU at all, but that’s just my preference.

      • Mhlindsey@lemmy.fmhy.ml
        link
        fedilink
        arrow-up
        2
        ·
        1 year ago

        Honestly, depending on your savings, a used GPU can still be quite a good deal. While it is true that a GPU used for mining or such could be on its last legs, you can do a lot to extend its life such as slightly undervolting and underclocking it. If it’s a difference of $50 or more, i think it’s worth it

  • Derin@lemmy.beru.co
    link
    fedilink
    arrow-up
    5
    ·
    1 year ago

    Build looks solid.

    My one note for you, though, is that your case’s max CPU cooler height is reported to be 155mm; and on your CPU cooler’s Amazon page, it purports to be exactly 155mm in height.

    It should fit, but it’s going to be tight. :P

    • pm_me_your_happiness@lemmy.oneOP
      link
      fedilink
      arrow-up
      3
      ·
      1 year ago

      Good catch, I didn’t even know to look at that. I think I’m going to stick with the stock cooler for now, and upgrade later if I need it.

  • Funderpants @lemmy.ca
    link
    fedilink
    arrow-up
    2
    ·
    1 year ago

    Can you save a few dollars going with a 5600 over a 5600x? I think they were very similar in performance.

    Check out the DeepCool line of coolers too, I have one ony 5800x and it does a bang up job.

    • pm_me_your_happiness@lemmy.oneOP
      link
      fedilink
      arrow-up
      2
      ·
      1 year ago

      I’ll check out the differences between the 5600, thanks!

      I think I’m going to stick with the stock cooler for now, I’ll upgrade that as needed.

  • Dudewitbow@lemmy.ml
    link
    fedilink
    arrow-up
    2
    ·
    1 year ago

    Honestly, I think you did a pretty good job overall with managing cost/parts.

    Do agree with the others saying the 5600 is a better buy than thr 5600X (the difference is stock boost clocks, and X moniker cpus also have XFR boost, whoch bumps clocks by 100Mhz, neither are really worth the cost difference between the models)

      • R0cket_M00se@lemmy.world
        link
        fedilink
        arrow-up
        2
        ·
        1 year ago

        I have built about four machines running on AM4/R5 5600, they still crush at 1920x1080p and can handle discord/game multitasking.

          • R0cket_M00se@lemmy.world
            link
            fedilink
            arrow-up
            2
            ·
            1 year ago

            Have fun with it!

            My only advice would be that your CPU isn’t going to be running high enough to really require a tower cooler. The stock wraith that comes with the processor should be good enough if you want to save the 40 bucks.

            Other than that good job picking things out on a budget!

            • pm_me_your_happiness@lemmy.oneOP
              link
              fedilink
              arrow-up
              2
              ·
              1 year ago

              I ended up not ordering the cooler based on the recommendations here. I should be able to start building sometime next week. Thanks!

      • babboa@lemmy.world
        link
        fedilink
        arrow-up
        1
        ·
        1 year ago

        The 5800x3d cpu is under $280 on Amazon today. Well worth it if you’re going am4 to just go ahead and buy once and cry once to max out your utility of the platform. It’s a great CPU. Really shines on poorly cpu optimized games like almost anything made in unity.

        • pm_me_your_happiness@lemmy.oneOP
          link
          fedilink
          arrow-up
          1
          ·
          1 year ago

          I saw that, I was considering it. I ended up picking up the 5600x today instead, as it’s cheaper than the 5600 that I’d budgeted for.

  • Copernican@lemmy.world
    link
    fedilink
    arrow-up
    2
    ·
    1 year ago

    If your mobo supports pci 4.0 for the nvme SSD, is it better to look at the Sabrant Rocket for 5 bucks more instead of Samsung Evo? Not sure if the performance difference is too noticeable. But If the mobo supports it, maybe consider it.

  • RagingHungryPanda@lemmy.world
    link
    fedilink
    arrow-up
    2
    ·
    edit-2
    1 year ago

    It looks solid, but an AM5 build will have more longevity for the board and ram. Itll cost a bit more now, but I was able to find something similar to what you have now on AM5 and still under 1,000

    https://pcpartpicker.com/list/ZTbKPX

    Edit: since you don’t need a cooler, you could probably get a 6750XT as well

    • pm_me_your_happiness@lemmy.oneOP
      link
      fedilink
      arrow-up
      1
      ·
      edit-2
      1 year ago

      With an AM5 build, wouldn’t I need to upgrade a few of the other components as well?

      Edit: nvm opened the link and saw the build. I’ll need to spend some time considering this lol

      • RagingHungryPanda@lemmy.world
        link
        fedilink
        arrow-up
        1
        ·
        1 year ago

        One option to consider if you want to save on am AM4 build would be to get used from people that are upgrading to AM5. I wouldn’t really recommend AM4 for a new build. But good luck!