It can be used, even while powered off, to track and surveil you.
How? The only legit thing I can think of is if they are tracking you anyway, and then they see your phone is turned off, they might try to claim that you must be up to something. But they won’t be able to track it while it’s off.
That’s not quite how it works, though. These devices are basically mini computers now, there’s a limit to what they can do without fully booting. Devices that are plugged into the wall might be likely to retain some power-draining function while plugged in, but there’s only so much you can do on a trickle charge while a phone is powered off.
They’re still running in low power mode and can wakeup from the network so they can absolutelly be made to “boot up” without turning the screen on and you being aware of it.
This is not like a bloody PC were the lights turn on and you can hear the fans when the thing starts, it’s a machine with a low power mode in which it can already do a lot and which can be brought to a high power mode if needed without there being any visible or audible side-effects to alert the user.
Unless you completelly cut it off from power (by taking the battery out, which you can’t in most modern smartphones) that smartphone with the lights off, the screen off and making no sound at all can just as easilly be in low power mode waiting for you to press the On button, as it can be in full power mode with a mobile network connection active, accessing the microphone and the GPS microchip and sending that data out, and both will look exactly the same from the outside.
I think you are overestimating what these devices can do when turned off, specifically when whoever is doing the tracking wants to be covert. Devices like Cellular Radios and GPS chipsets are getting more efficient every year, but they still consume enough power that it would be noticed if they came on by themselves even if the device was off.
I have an EE degree and have actually done work with embedded systems, including GPS.
The peak consumption of things like GPS is maybe 100 milliamps, with the average being in the tens of milliamps.
The wireless networking stuff is similarly frugal.
Further, stuff like encoding of audio is all done on the hardware and very efficient so even voice capture and encoding to send over the network isn’t processor intensive.
Further, the CPUs on those things are ARM designs or equivalent, specifically crafted for low consumption and which have tons of tricks to avoid spending even a mW extra of power if it’s not needed (basically the CPU will tend to activate only the bits it needs and use only the resources it needs to accomplish the operations its running, so it’s almost never running at peak consumption).
The really big power consumption in modern smartphones is the screen and from very high GPU/CPU usage in things like games.
I think you seriously overestimate the similarity between modern portable devices design to operate from quite small batteries and things like desktop Personal Computers which are designed to operate from mains power.
If all they’re doing is sending your GPS position out over the netweork every couple of minutes you won’t notice that the battery has drained a tiny bit faster than expected even if you keep a keen eye on consumption because so little power is used to run just that part of the functionality.
Doesn’t a modern smartphone have something like a 4000 mAH battery? And that lasts most people all day with room to spare? Even 100 mA every few minutes will get noticed, if someone has their phone off and expecting consumption to stay minimal.
And that’s the key thing here, you’re not just building a tracking platform but you are building it into commodity phone hardware without the users consent, and without them noticing. Any phone that burns that much power while off would likely get replaced by the user. Do you think the phone vendors are in on it?
It’s not 100mA every few minutes, it’s 100mA when calibrating from scratch with no satellites known.
I looked it up and the consumption when in normal use is around 30mA, which would mean that, say, if it took 10 seconds (probably a lot more than needed if you’re not travelling) every 5 minutes - which adds up to 120 seconds @ 30mA per hour - that would consume 1mA/h (PS: by pure absolute chance my numbers ended yielding a result of 1 ;)), which is 0.025% of that battery per hour. If you’re lucky, in the phone screen were one would be visualizing the graph for the battery power charge over time that would make the line fall 1 pixel.
It really is a whole other world out there in the embedded and low power systems domain.
In order to not “start from scratch”, though, you will need to save some state persistently about your location (and the location of the satellites), which will cost power. Then you go in a building and lose all your signal, while still burning power to maintain that old state.
If it was that easy and cheap in terms of power, AirTags would have GPS receivers. They don’t.
let’s put aside everything @Aceticon@lemmy.world wrote you;
if the French state was trying to legalize exactly this, it must be possible: la validation pure et simple de l’activation à distance des fonctions de géolocalisation de téléphone et autres objets connectés (voiture, balises airtag, montre etc) qui repose exactement sur le même procédé technique que le dispositif censuré : la compromission d’un périphérique, en y accédant directement ou par l’intermédiaire d’un logiciel espion pour en prendre le contrôle à distance.
Nothing in your links above indicate that the spyware operates while the phones are powered off (although I relied on a crappy translation of the French). Could spyware mock the shutdown process so that it looks like the phone is powered off while the phone is actually running? Sure it can, but the victim will be tipped off when the phone’s battery is being drained even while it is “shut off”. (And someone who is paranoid enough to shut down their phone would pay attention to that.) . It seems like it’s not worth the effort.
read, listen to people that were spied on using the pegasus software. Easy to find
i don’t know if you’ve met any real activists, militants in your life but they’re rarely geeks. And checking the battery of their phone or reading about battery life isn’t one of their priorities
Yes, info on Pegasus is easy to find. And never says Pegasus is active when the phone is powered off. It’s undetectable and insidious in what it can grab, but at no point is there any reference at all to being active while the phone is powered off.
If you have a reference that states otherwise (that isn’t written by an AI), please supply it. I’ll be happy to give up on this if someone can prove their point.
And that is because it is way too easy to detect when the phone is off, not only because of the battery drain, but because the radios would be transmitting when they shouldnt . Plus, persisting across a reboot requires some trace of the Trojan to be on physical storage, which is more likely to be found on a scan.
I am assuming that when a state-level actor is hacking a phone, they are targeting a person directly, and know how to get the Trojan on undetected. Their main goal will be to continue to siphon data off it while it is in use. It’s not worth the risk of detection to track it while it is off (and not being used, after all.) Don’t you think they would prefer to use the same method they used the first time to infect the burner phone that’s actually being used?
How? The only legit thing I can think of is if they are tracking you anyway, and then they see your phone is turned off, they might try to claim that you must be up to something. But they won’t be able to track it while it’s off.
If you can’t take out the battery, it’s never actually off.
That’s not quite how it works, though. These devices are basically mini computers now, there’s a limit to what they can do without fully booting. Devices that are plugged into the wall might be likely to retain some power-draining function while plugged in, but there’s only so much you can do on a trickle charge while a phone is powered off.
They’re still running in low power mode and can wakeup from the network so they can absolutelly be made to “boot up” without turning the screen on and you being aware of it.
This is not like a bloody PC were the lights turn on and you can hear the fans when the thing starts, it’s a machine with a low power mode in which it can already do a lot and which can be brought to a high power mode if needed without there being any visible or audible side-effects to alert the user.
Unless you completelly cut it off from power (by taking the battery out, which you can’t in most modern smartphones) that smartphone with the lights off, the screen off and making no sound at all can just as easilly be in low power mode waiting for you to press the On button, as it can be in full power mode with a mobile network connection active, accessing the microphone and the GPS microchip and sending that data out, and both will look exactly the same from the outside.
I think you are overestimating what these devices can do when turned off, specifically when whoever is doing the tracking wants to be covert. Devices like Cellular Radios and GPS chipsets are getting more efficient every year, but they still consume enough power that it would be noticed if they came on by themselves even if the device was off.
I have an EE degree and have actually done work with embedded systems, including GPS.
The peak consumption of things like GPS is maybe 100 milliamps, with the average being in the tens of milliamps.
The wireless networking stuff is similarly frugal.
Further, stuff like encoding of audio is all done on the hardware and very efficient so even voice capture and encoding to send over the network isn’t processor intensive.
Further, the CPUs on those things are ARM designs or equivalent, specifically crafted for low consumption and which have tons of tricks to avoid spending even a mW extra of power if it’s not needed (basically the CPU will tend to activate only the bits it needs and use only the resources it needs to accomplish the operations its running, so it’s almost never running at peak consumption).
The really big power consumption in modern smartphones is the screen and from very high GPU/CPU usage in things like games.
I think you seriously overestimate the similarity between modern portable devices design to operate from quite small batteries and things like desktop Personal Computers which are designed to operate from mains power.
If all they’re doing is sending your GPS position out over the netweork every couple of minutes you won’t notice that the battery has drained a tiny bit faster than expected even if you keep a keen eye on consumption because so little power is used to run just that part of the functionality.
Doesn’t a modern smartphone have something like a 4000 mAH battery? And that lasts most people all day with room to spare? Even 100 mA every few minutes will get noticed, if someone has their phone off and expecting consumption to stay minimal.
And that’s the key thing here, you’re not just building a tracking platform but you are building it into commodity phone hardware without the users consent, and without them noticing. Any phone that burns that much power while off would likely get replaced by the user. Do you think the phone vendors are in on it?
It’s not 100mA every few minutes, it’s 100mA when calibrating from scratch with no satellites known.
I looked it up and the consumption when in normal use is around 30mA, which would mean that, say, if it took 10 seconds (probably a lot more than needed if you’re not travelling) every 5 minutes - which adds up to 120 seconds @ 30mA per hour - that would consume 1mA/h (PS: by pure absolute chance my numbers ended yielding a result of 1 ;)), which is 0.025% of that battery per hour. If you’re lucky, in the phone screen were one would be visualizing the graph for the battery power charge over time that would make the line fall 1 pixel.
It really is a whole other world out there in the embedded and low power systems domain.
In order to not “start from scratch”, though, you will need to save some state persistently about your location (and the location of the satellites), which will cost power. Then you go in a building and lose all your signal, while still burning power to maintain that old state.
If it was that easy and cheap in terms of power, AirTags would have GPS receivers. They don’t.
let’s put aside everything @Aceticon@lemmy.world wrote you; if the French state was trying to legalize exactly this, it must be possible: la validation pure et simple de l’activation à distance des fonctions de géolocalisation de téléphone et autres objets connectés (voiture, balises airtag, montre etc) qui repose exactement sur le même procédé technique que le dispositif censuré : la compromission d’un périphérique, en y accédant directement ou par l’intermédiaire d’un logiciel espion pour en prendre le contrôle à distance.
source
wasn’t the scandal about the Pegasus spyware all about this imperceptibility?
Nothing in your links above indicate that the spyware operates while the phones are powered off (although I relied on a crappy translation of the French). Could spyware mock the shutdown process so that it looks like the phone is powered off while the phone is actually running? Sure it can, but the victim will be tipped off when the phone’s battery is being drained even while it is “shut off”. (And someone who is paranoid enough to shut down their phone would pay attention to that.) . It seems like it’s not worth the effort.
read, listen to people that were spied on using the pegasus software. Easy to find
i don’t know if you’ve met any real activists, militants in your life but they’re rarely geeks. And checking the battery of their phone or reading about battery life isn’t one of their priorities
Yes, info on Pegasus is easy to find. And never says Pegasus is active when the phone is powered off. It’s undetectable and insidious in what it can grab, but at no point is there any reference at all to being active while the phone is powered off.
https://en.m.wikipedia.org/wiki/Pegasus_(spyware)
If you have a reference that states otherwise (that isn’t written by an AI), please supply it. I’ll be happy to give up on this if someone can prove their point.
And that is because it is way too easy to detect when the phone is off, not only because of the battery drain, but because the radios would be transmitting when they shouldnt . Plus, persisting across a reboot requires some trace of the Trojan to be on physical storage, which is more likely to be found on a scan.
I am assuming that when a state-level actor is hacking a phone, they are targeting a person directly, and know how to get the Trojan on undetected. Their main goal will be to continue to siphon data off it while it is in use. It’s not worth the risk of detection to track it while it is off (and not being used, after all.) Don’t you think they would prefer to use the same method they used the first time to infect the burner phone that’s actually being used?
back in the loop ☞ https://lemmy.world/comment/9738706
have a good day