Where would I look for a list of what network chips are supported in any given kernel? I’m looking to build my first computer designed from the ground up for Linux and want to be sure that the Ethernet port and WiFi chip will work without needing to do anything special.

  • seaQueue@lemmy.world
    link
    fedilink
    arrow-up
    2
    ·
    7 months ago

    I just stick with Intel, Mellanox or Aquantia for wired networking and Intel or Qualcomm for wireless - those are always safe bets. Realtek is extremely hit and miss, I’d drop a cheap Intel NIC in the machine rather than relying on the onboard realtek.

    • sic_semper_tyrannis@lemmy.todayOP
      link
      fedilink
      arrow-up
      1
      ·
      7 months ago

      That’s generally my mindset but the motherboard price jumps up quite a bit for one that has only Intel. Every other board has a Realtek chip on either the Ethernet or WiFi.

      • Atemu@lemmy.ml
        link
        fedilink
        arrow-up
        1
        ·
        7 months ago

        Realtek LAN is usually not too bad.

        For WiFi, you want mediatek or Intel though.

        • seaQueue@lemmy.world
          link
          fedilink
          arrow-up
          1
          ·
          7 months ago

          We’ve had seemingly endless support issues with mediatek WiFi over the last 2-3y in the asus-linux community. Most people have either pulled their mediatek cards and replaced them with intel or have just gotten used to rebooting every time they have a mediatek driver issue.

      • seaQueue@lemmy.world
        link
        fedilink
        arrow-up
        1
        ·
        7 months ago

        I just chuck an add in NIC in and ignore the onboard LAN hardware. Wireless is usually an m.2 board and easily replaced as well. Total cost there is like $30 for both if you pick both up on fleaBay.

        • sic_semper_tyrannis@lemmy.todayOP
          link
          fedilink
          arrow-up
          1
          ·
          7 months ago

          It’s a mini iTX board so I won’t have room for an extra network card. Yes I could swap WiFi chips as it’s a daughter board but then I come back to the issue of what works with Linux